Пожалуйста, используйте этот идентификатор, чтобы цитировать или ссылаться на этот ресурс:
https://elar.rsvpu.ru/handle/123456789/40008
Полная запись метаданных
Поле DC | Значение | Язык |
---|---|---|
dc.contributor.author | Anakhov, S. V. | en |
dc.contributor.author | Gladkovskiy, S. V. | en |
dc.contributor.author | Lepikhin, S. V. | en |
dc.contributor.author | Dvoynikov, D. A. | en |
dc.contributor.author | Pykin, Y. A. | en |
dc.contributor.author | Matushkin, A. V. | en |
dc.coverage.spatial | RSVPU | en |
dc.coverage.spatial | SCOPUS | en |
dc.date.accessioned | 2022-05-20T09:20:07Z | - |
dc.date.available | 2022-05-20T09:20:07Z | - |
dc.date.issued | 2017 | - |
dc.identifier.issn | 9507116 | - |
dc.identifier.other | https://www.scopus.com/record/display.uri?origin=resultslist&eid=2-s2.0-85014434083 | scopus_url |
dc.identifier.uri | https://elar.rsvpu.ru/handle/123456789/40008 | - |
dc.description.abstract | The results of investigations of the mechanical properties of welded joints produced after cutting 09G2N steel by mechanical methods and by plasma torches of different design are presented. It is shown that the impact toughness and static bend strength of the welded joints, produced after plasma cutting without removing the zones of the thermal effect, are not inferior to the parameters obtained after mechanical cutting. In the application of the new single-circuit plasma torch for cutting metals prior to welding, it is possible to produce high-quality welded joints with high productivity and low energy consumption. © 2017 Informa UK Limited, trading as Taylor & Francis Group. | en |
dc.language.iso | en | en |
dc.publisher | Taylor and Francis Ltd. | en |
dc.rights | info:eu-repo/semantics/restrictedAccess | en |
dc.source | Welding International | en |
dc.subject | DESIGN | en |
dc.subject | DESTRUCTION | en |
dc.subject | EFFICIENCY | en |
dc.subject | HEAT-AFFECTED ZONE | en |
dc.subject | IMPACT STRENGTH | en |
dc.subject | PLASMATRON | en |
dc.subject | QUALITY | en |
dc.subject | STATIC BEND | en |
dc.subject | WELDING SEEMS | en |
dc.subject | CUTTING | en |
dc.subject | DESIGN | en |
dc.subject | EFFICIENCY | en |
dc.subject | ENERGY UTILIZATION | en |
dc.subject | HEAT AFFECTED ZONE | en |
dc.subject | IMAGE QUALITY | en |
dc.subject | IMPACT STRENGTH | en |
dc.subject | LOW POWER ELECTRONICS | en |
dc.subject | PLASMA ARC CUTTING | en |
dc.subject | PLASMA TORCHES | en |
dc.subject | WELDED STEEL STRUCTURES | en |
dc.subject | WELDS | en |
dc.subject | DESTRUCTION | en |
dc.subject | HIGH PRODUCTIVITY | en |
dc.subject | LOW ENERGY CONSUMPTION | en |
dc.subject | MECHANICAL CUTTING | en |
dc.subject | MECHANICAL METHODS | en |
dc.subject | PLASMATRONS | en |
dc.subject | STATIC BEND | en |
dc.subject | TECHNOLOGICAL PROPERTIES | en |
dc.subject | WELDING | en |
dc.title | Mechanical and technological properties of welded joints produced after plasma cutting | en |
dc.type | Article | en |
dc.type | info:eu-repo/semantics/article | en |
dc.type | info:eu-repo/semantics/publishedVersion | en |
dcterms.audience | Other | en |
dcterms.audience | Parents and Families | en |
dcterms.audience | Researchers | en |
dcterms.audience | School Support Staff | en |
dcterms.audience | Students | en |
dcterms.audience | Teachers | en |
local.description.firstpage | 445 | - |
local.description.lastpage | 451 | - |
local.issue | 6 | - |
local.volume | 31 | - |
local.identifier.doi | 10.1080/09507116.2016.1268761 | - |
local.identifier.scopus | 85014434083 | - |
local.identifier.eid | 2-s2.0-85014434083 | - |
local.identifier.affiliation | Russian State Professional and Pedagogical University, Ekaterinburg, Russian Federation | en |
local.identifier.affiliation | Institute of Engineering, Urals Division of the Russian Academy of Sciences, Ekaterinburg, Russian Federation | en |
local.identifier.affiliation | Ural State Technical University, Ekaterinburg, Russian Federation | en |
local.identifier.affiliation | Ural Federal University, Ekaterinburg, Russian Federation | en |
local.identifier.source | Scopus | en |
local.identifier.other | https://www.scopus.com/inward/record.uri?eid=2-s2.0-85014434083&doi=10.1080%2f09507116.2016.1268761&partnerID=40&md5=116f3160d86a1a3b984b33cf10b1d518 | |
local.contributor.employee | Anakhov, S.V., Russian State Professional and Pedagogical University, Ekaterinburg, Russian Federation | |
local.contributor.employee | Gladkovskiy, S.V., Institute of Engineering, Urals Division of the Russian Academy of Sciences, Ekaterinburg, Russian Federation | |
local.contributor.employee | Lepikhin, S.V., Institute of Engineering, Urals Division of the Russian Academy of Sciences, Ekaterinburg, Russian Federation | |
local.contributor.employee | Dvoynikov, D.A., Institute of Engineering, Urals Division of the Russian Academy of Sciences, Ekaterinburg, Russian Federation | |
local.contributor.employee | Pykin, Y.A., Ural State Technical University, Ekaterinburg, Russian Federation | |
local.contributor.employee | Matushkin, A.V., Ural Federal University, Ekaterinburg, Russian Federation | |
Располагается в коллекциях: | Научные публикации, проиндексированные в SCOPUS и WoS |
Файлы этого ресурса:
Нет файлов, ассоциированных с этим ресурсом.
Все ресурсы в архиве электронных ресурсов защищены авторским правом, все права сохранены.