Пожалуйста, используйте этот идентификатор, чтобы цитировать или ссылаться на этот ресурс: https://elar.rsvpu.ru/handle/123456789/28105
Полная запись метаданных
Поле DCЗначениеЯзык
dc.contributor.authorLekhov, O. S.en
dc.contributor.authorMikhalev, A. V.en
dc.coverage.spatialRSVPUen
dc.coverage.spatialSCOPUSen
dc.date.accessioned2019-07-17T10:00:13Z-
dc.date.available2019-07-17T10:00:13Z-
dc.date.issued2017-
dc.identifier.issn2410-2091-
dc.identifier.issn0368-0797-
dc.identifier.otherhttps://fermet.misis.ru/jour/article/download/1123/980pdf
dc.identifier.otherhttps://www.scopus.com/record/display.uri?origin=resultslist&eid=2-s2.0-85028066470scopus_url
dc.identifier.urihttps://elar.rsvpu.ru/handle/123456789/28105-
dc.description.abstractTechnological feasibility of combined process and installation of continuous casting and deformation to obtain high mechanical properties and fine-grained structure of steel sheets for weld pipes are considered. The problem of metal stress-strain state under solidified metal cobbing by the die walls of assembly mold is stated taking into account a force of the liquid phase pulling from the permanent crystallizer of installation. Parameters of cyclic deformation focus for thin slab sheets production, initial data for design and boundary conditions of the problem are given. A design scheme for determining stress-strain state of metal in circular deformation focus is presented. Results are obtained by solving the problem of continuum mechanics by finite element method: flat statement of contact problem of elastic-plasticity was used in conditions of large deformations and displacements. ANSYS software was used to solve the problem. The calculation results are presented in form of stress diagrams along the strip symmetry axis and on part of contact line of deformation focus with the die wall. Regularities of distribution of tangential stresses on contact surface of circular deformation focus are presented. Evaluation of solidified metal flow on the boundary with liquid phase during solidified metal cobbing by die walls is provided taking into account a force of liquid phase pulling from permanent crystallizer. The estimation of stress state scheme of metal in circular deformation focus during thin slab cobbing with a high degree of deformation is described in order to improve quality of steel sheets for weld pipes production. The main parameters of continuous casting and deformation plant for weld pipes steel sheets production are given. © 2017, National University of Science and Technology MISIS. All rights reserved.en
dc.format.mimetypeapplication/pdfen
dc.language.isoruen
dc.publisherNational University of Science and Technology MISiSen
dc.rightsinfo:eu-repo/semantics/openAccessen
dc.sourceIzvestiya Ferrous Metallurgyen
dc.subjectDEFORMATION FOCUSen
dc.subjectDISPLACEMENTen
dc.subjectFORCEen
dc.subjectINSTALLATIONen
dc.subjectPARAMETERSen
dc.subjectTENSIONen
dc.titleContinuous casting and deformation installation for the production of steel plates for welded pipes. Report 2en
dc.typeArticleen
dc.typeinfo:eu-repo/semantics/articleen
dc.typeinfo:eu-repo/semantics/publishedVersionen
dcterms.audienceOtheren
dcterms.audienceParents and Familiesen
dcterms.audienceResearchersen
dcterms.audienceSchool Support Staffen
dcterms.audienceStudentsen
dcterms.audienceTeachersen
local.description.firstpage522-
local.description.lastpage526-
local.issue7-
local.volume60-
local.identifier.doi10.17073/0368-0797-2017-7-522-526-
local.identifier.scopus85028066470-
local.identifier.eid2-s2.0-85028066470-
local.identifier.affiliationRussian State Professional Pedagogical University, Ekaterinburg, Russian Federationen
local.identifier.sourceScopusen
local.identifier.otherLekhov, O.S., Russian State Professional Pedagogical University, Ekaterinburg, Russian Federationen
local.identifier.otherMikhalev, A.V., Russian State Professional Pedagogical University, Ekaterinburg, Russian Federationen
Располагается в коллекциях:Научные публикации, проиндексированные в SCOPUS и WoS

Файлы этого ресурса:
Файл Описание РазмерФормат 
1123-2540-1-SM.pdf1,01 MBAdobe PDFПросмотреть/Открыть


Все ресурсы в архиве электронных ресурсов защищены авторским правом, все права сохранены.