Пожалуйста, используйте этот идентификатор, чтобы цитировать или ссылаться на этот ресурс:
https://elar.rsvpu.ru/handle/123456789/40093
Название: | Production of three-layer steel bimetallic strips in the unit of continuous casting and deformation. Report 2 |
Другие названия: | ИССЛЕДОВАНИЕ ПРОЦЕССА ПОЛУЧЕНИЯ ТРЕХСЛОЙНЫХ СТАЛЬНЫХ БИМЕТАЛЛИЧЕСКИХ ПОЛОС НА УСТАНОВКЕ НЕПРЕРЫВНОГО ЛИТЬЯ И ДЕФОРМАЦИИ. СООБЩЕНИЕ 2 |
Автор: | Lekhov, O. S. Mikhalev, A. V. Shevelev, M. M. |
Дата публикации: | 2019 |
Издатель: | National University of Science and Technology MISIS |
Аннотация: | The paper states urgency of the problem of determining stress-strain state of metals of the cladding layer and the main strip in production of three-layer bimetal: alloyed steel-constructional steel-alloyed steel. Temperature field of the main strip and cladding layer is given to calculate stress-strain state of metals of three-layer bimetallic strip. Initial data for calculating this stress-strain state are given. To assess the effect of coefficient of friction between cladding layers and the main strip on stress-strain state of metals in deformation zone, three values of it are taken. Geometric model is described for calculating stress-strain state and metal flow in deformation center of cladding layer. Characteristic lines and points of calculation are provided. Technique for solving the problem of determining stresses and flows in deformation focus is described by finite element method using ANSYS app. Regularities of flow of cladding layer’s metal along the length of deformation center and movement of the main strip of bimetallic ingot are given. Values of mutual displacement of layers of bimetallic strip are determined as a function of deformation degree of the cladding layer. And the recommendations are given on this degree to improve quality of a three-layer bimetal. Regularities of distribution of axial and tangential stresses in deformation center are presented for production of steel three-layer bimetallic strips in the unit of combined continuous casting and deformation. Stress state of the cladding layer’s metal in focus of cyclic deformation was estimated from the position of improving quality of three-layer bimetallic strips produced in such unit. © 2019 National University of Science and Technology MISIS. All rights reserved. |
Ключевые слова: | CLADDING LAYER COMBINED PROCESS CONTINUOUS CASTING DEFORMATION DEFORMATION CENTER METAL MELT STRIKER STRIP TENSION THREE-LAYER BIMETAL UNIT |
ISSN: | 3680797 |
DOI: | 10.17073/0368-0797-2019-10-763-768 |
SCOPUS: | 85078089313 |
Располагается в коллекциях: | Научные публикации, проиндексированные в SCOPUS и WoS |
Файлы этого ресурса:
Файл | Описание | Размер | Формат | |
---|---|---|---|---|
2-s2.0-85078089313.pdf | 547,3 kB | Adobe PDF | Просмотреть/Открыть |
Все ресурсы в архиве электронных ресурсов защищены авторским правом, все права сохранены.